Favour Required From Focus St 225/mondeo Mk3 Owner - General Banter - STdriveRS

Jump to content


News Feed

View All Updates


Favour Required From Focus St 225/mondeo Mk3 Owner

Caliper Carrier Measurement

This topic has been archived. This means that you cannot reply to this topic.
1 reply to this topic

#1 u33db


    Just passed!

  • Members
  • 151 posts

Posted 18 April 2018 - 08:39 AM



Looking for a favour from some MK2 Focus ST 225/Mk3 Mondeo owners...


If anyone has their wheels off could you measure the distance between the caliper mounting brackets for me as below;




Complicated story...


Its been some years since i had a Mondeo and now find myself in a Corsa but wanting bigger brakes.


Ideally i want to fit the Vectra VXR calipers but the carrier isn't a direct fit...i'm hoping since the Focus runs the same calipers that the Ford carrier is a better match for my Corsa hub so will bolt up with minimal adjustment.


Would be very much appreciated!

1.8 Zetec - sold.
1.8 LX...lowered - sold.
2.2 TDCI Titanium X...decated and Roverron'd - sold.
2.0 TDCI 130 Zetec...Decated, Roverron'd, Airtec intercooler, Forge hoses, "widow maker" ABS, -55mm PI Springs and Bilsten B8 shocks - sold.
2.0 TDCI 130 Zetec...Decated, Roverron'd, Forge hoses, Eibach -40mm Springs, ASBOs, Racebits intercooler, ST220 boot spoiler, Titx/Edge valances and Zetec S skirts coming - sold.

1.6 Corsa SRI...200+ bhp.

#2 ST56


    Post Whore

  • Validating
  • 4808 posts

Posted 18 April 2018 - 04:43 PM


90mm for the Mondeo and Focus ASBO carriers. The other important dimensions are distance bolts are away from wheel centre to set disc diameter and offset to align with disc when fitted to hub.


5 Door ST TDCi, Performance Blue, Privacy glass, Black Leather/Alcantara Recaro's, Denso Sat Nav, Advanced Bluetooth, Voice Control, Rear Parking Sensors, Jaguar Flip Key, Eibach Springs Fin No.1132335, Added Foam Rear Bumper support pads. Focus indicators in mirrors. ASBO Calipers Painted Red. Ford Discs Front & Rear. With RedStuff pads.CCFL Halo’s by Chromiumtech. 6000K D2S Bulbs in Ford Projectors dip beam. 6000K H1 HID Kit Main Beam, FORGE Boost & Inlet Hoses. Full 2.5" bore Turbo back exhaust system with 4’’ Tailpipe from MIJ Exhaust. 20mm wheel spacers Front & Back.