Bmc Cda Induction Advice - Exhausts / Air Intake - Induction (Fiesta ST) - STdriveRS

Jump to content

header
header




Photo

Bmc Cda Induction Advice


This topic has been archived. This means that you cannot reply to this topic.
3 replies to this topic

#1 fieSTa Chris

fieSTa Chris

    Learner STdriver

  • Members
  • 2 posts

Posted 20 November 2012 - 10:14 AM

Hi,
I am looking at getting a BMC CDA for my Fiesta ST. Was wondering what peoples thoughts are on them and any fitting advice. I am new to owning an ST, had it about a month, so any advice would be appreciated.
Thanks

#2 mk3_turbo

mk3_turbo

    Google Expert

  • Members
  • 904 posts

Posted 21 November 2012 - 12:51 AM

Hi, Is it specifically designed for the Fiesta ST or is it a generic BMC filter?
Biulding the ultimate stealth/ sleeper - under construction -

mk3_turbo mondeo ------ 50-70mph in top - 5.65 seconds

Ferrrari f430 ------------- 50-70mph in top - 6.40 seconds

#3 fieSTa Chris

fieSTa Chris

    Learner STdriver

  • Members
  • 2 posts

Posted 27 November 2012 - 01:14 PM

Hi, it is specifically for the Fiesta ST.

#4 mk3_turbo

mk3_turbo

    Google Expert

  • Members
  • 904 posts

Posted 28 November 2012 - 06:28 PM

Yes, should be easy to fit/ fit well with the fitting fior the MAF etc

You are probably aware of the advantages of this type of filter - flows more air than the stock filter and as it is shielded does not draw warm air like a K&N would, (which loses power)

Pipercross make a similar enclosed filter (venom)

The MAF should compensate for the extra airflow so it won't run lean, the BMC can be used with remap or Bluefin and a freer- flowing exhaust / sports cat, probably won't make a massive amount more power but can improve throttle response etc and with some other modifications (eg weight saving) can add up
Biulding the ultimate stealth/ sleeper - under construction -

mk3_turbo mondeo ------ 50-70mph in top - 5.65 seconds

Ferrrari f430 ------------- 50-70mph in top - 6.40 seconds