Ford ST/RS Forum banner

Isofix

2K views 1 reply 2 participants last post by  back2black 
#1 ·
Hi everyone just fitted the ford focus isofix kit to my Mondeo ST bought for £14 off ebay .First i wanted it to be fitted to the passenger side larger seat .The isofix it self is very sturdy i used the hole on the right hand side under the seat right side is two torx bolts to seat belt i unscrewed the lower one and put the part on to it and tightened the bolt back up yo get the correct level then drilled two more holes same size has torx bolt through the part and body of the car be careful not to go two far DIESEL TANK UNDERNEATH managed to get the lockable nuts on to the bolts ok by taking the o/s rear wheel off you can just get enough room tightened to 100 psi .Took me about an hour was`nt rushing at all .Pathetic that fords do not fit them to the ST seats.Cheers Guys
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top