1-Masked the area around the section i wanted to spray
2-Then panel wiped the area to make sure free from polish.
3-Sprayed thin coats leaving about 5mins between each coat took about 3 coats to get the right blue i wanted.
4-Removed masking tape and paper.
5-Place the Recaro decal made for banners so it is soft to the touch and made for leather(from ebay)
6-Leave on the app tape then rub while adding some heat from gun or hair dryer then remove app tape.
7-Reheat again making sure that the decal is stuck well.
8-Job Done!!!
If you want detail on the paint i used it is on ebay item no.
260907493330 you can get many colours i have used this product before on a steering wheel i had it on there for 2 years until i sold the car which went to Malta (RS2000).














