Jump to content



Window motor failure


2 replies to this topic

#1 stef

    Just passed!

  • Members
  • 69 posts
  • 1 thanks
  • Joined 28-June 11
  • Vehicle Driven:Mondeo ST TDCI
  • Name:Stefan
  • Location:Scotland

Posted 30 December 2011 - 05:22 PM


Evening all,

This applies to all mk6 fiestas, not just the ST but i thought i would share a little info. my apologies if this has been covered before

If you have ever had your window drop or it failing to open/close but can still hear the motor then there is a good chance its the gear on the motor which has failed.. it has actually split all the way round

these are a couple of pics i took tonight, second one ive done but ive heard a few people complaining about it so i reckon it could be quite a common fault?

quite an easy job, strip the door card off, couple of torx screws, hex head screw and some clips. 3 torx screws hold the motor in.

Posted Image

Posted Image


Stef

Guest Advert

  • Guest Advert
Registered users don't see this advert! Register now, it's free!

#2 GingerTom

    Streetkat !

  • Super Moderator
  • 11,973 posts
  • 87 thanks
  • Joined 27-September 07
  • Vehicle Driven:Mondeo Mk4 2.2
  • Location:Shropshire

Posted 30 December 2011 - 06:02 PM

Wow plastic fatigue. Nasty. I would pin them together reinforced with superglue.
June 2009 Mondeo Mk4 2.2 TitaniumX Sport with Bluefin. 220bhp, 490Nm, 350lbft.
Mondeo Mk4 diary: http://www.stdrivers...txs-2009-diary/
Mondeo Mk3 diary: http://www.stdrivers....php?tid/19677/
Streetka diary: http://www.stdrivers...ka-ice-16-2005/

Thanked by 1 Member:

#3 stef

    Just passed!

  • Members
  • 69 posts
  • 1 thanks
  • Joined 28-June 11
  • Vehicle Driven:Mondeo ST TDCI
  • Name:Stefan
  • Location:Scotland

Posted 30 December 2011 - 06:07 PM

View PostGingerTom, on 30 December 2011 - 06:02 PM, said:

Wow plastic fatigue. Nasty. I would pin them together reinforced with superglue.

not sure if superglue would be strong enough, but then if they are pinned somehow? would be worth a try i guess though as the motors are very pricey.





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users